This manual will familiarize you with the features, operation standards and installation of Carmanah’s SPEEDCHECK-12 polycarbonate window or static sign. Failure to comply with the use, storage, maintenance, installation or placement instructions detailed in this manual could void the warranty.
Page 4
This guide is specific to the SPEEDCHECK-12 replacement window and/or static sign installation and is not a replacement for the complete SPEEDCHECK-12 product user manual. Visit support.carmanah.com to download the complete product user manual. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
The following tools and materials may be required to install the polycarbonate window or static sign into your SPEEDCHECK-12 system: 1. Socket set 2. Multi-bit screwdriver with 5/32" pin-in hex security bit Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
2. Apply diagonal pressure to the bottom right corner of the sign face then PULL on the key. 3. Once unlocked, the key can be removed. 4. Swing the display enclosure away from the rear enclosure. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
3. Carefully slide the display assembly down and away from the top rail drip shield (this may require a bit of force to come loose). Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
1. Flip the display assembly on its back and expose the polycarbonate window. 2. Remove the two screws at the bottom of the display assembly and remove the polycarbonate window. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...
2. Adjust display assembly until all holes are lined up with the static sign threaded inserts. 3. Secure the assembly with the six security screws from Section 4.3. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com carmanah.com...
4. To close, push the display enclosure against the rear enclosure and then apply diagonal pressure in the bottom right corner of the sign face. Once fully close, PUSH the lock to secure in place. Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | customersupport@carmanah.com...