Electronic Programmer (Main Oven Only); Symbols Description - CDA RC 9620 Installation And Use Manual

Electronic Programmer (Main Oven Only)

The electronic programmer is a device that groups together the following functions:
– 24 hour clock with illuminated display
– Timer (up to 23 hours and 59 minutes)
– Programme for automatic oven cooking
– Programme for semi-automatic oven cooking.
Description of the buttons:
Symbols Description
Timer
Cooking time
End of cooking time
Manual position and cancellation of
the set cooking program
To increase the numbers on the
digital display
To decrease the numbers on the
digital display.
Note:
Select a function by the respective button and, in 5 seconds, set the required time with the
("one-hand" operation).
After a power cut the display resets to zero and cancels the set programs.
Fig. 3
A
U
T
O
Description of the illuminated symbols:
Symbols Description
AUTO
Programmer in automatic position
flashing but not programmed.
AUTO
Programmer in automatic position
with program set.
always lit
Automatic cooking taking place.
Timer in operation
Program error.
and
(The time of day lies between the
AUTO
calculated cooking start and end
flashing
time).
Fig. 4
/ buttons
5