Telemetry Control; System Information; Backup - Ganz ZR-DH921NP Instruction Manual

16/9 ch digital video recorder
Hide thumbs Also See for ZR-DH921NP:
Table of Contents

Advertisement

3. 6. 10 Telemetry Control

• Unit ID
When multiple DVRs are connected,
assign an ID to each DVR. The Unit ID
can be 0 ~ 99.
• Unit Baud Rate
Select the DVR communication speed.
• PORT A, PORT 1, PORT 2
Select either DVR/keypad or one of the
PTZ protocol. PORT 2 can be disabled.

3. 6. 11 System Information

Displays the current software and BIOS
versions.
ZR-DH1621NP

3. 7 Backup

The information stored on the MAIN HDD
drives can be copied for archiving. The
backup can be made to the Backup HDD
drive, USB device or CD-R/RW drive.
• Time
Define the start and end date/time.
24
ZR-DH921NP
• Channel Selection
Select the channels to archive.
• Event partition Only : This function
searches data in only 'Event Partition'area,
and executes backup.
• Use Mark : This function executes backup
of data set as 'Mark In/Mark out'
• HDD Backup
Specified information is copied to the
Backup HDD drive defined in HDD
Management.
• USB Backup
Specified information is copied to the USB
device defined in HDD Management.
• CD Backup
Specified information is copied to the CD-
R/RW drive.
Note
Recording is interrupted during the CD
Backup operation. CD Backup is
possible only with IEEE 1394 CD-
R/RW devices.
• Erase CD-RW
Select this option to erase CD-RW media.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zr-dh1621np

Table of Contents