Table of Contents
Advertisement
REAR
1
2
3
1) PORT A (RS-422)
Used for communicating with external
devices in full-duplex RS-422.
2) LAN
10/100 Base-T ethernet connection.
3) PORT B (RS-422/RS-485)
Used for communicating with external
devices in full-duplex RS-422 or half-duplex
RS-485
4) ALARM IN
16 alarm inputs.
5) ALARM OUT
4 alarm outputs.
6) S-VIDEO
Monitor output as S-VIDEO signal.
7) IEEE 1394
Connect external IEEE 1394 devices
(FireWire) such as HDD and CD-RW.
Notice
Connect and power IEEE 1394
devices prior to powering DVR. Some
devices may not be recognized when
both HDD and CD-R/RW devices are
present.
4
5
6
12
8) MONITOR
9) SPOT OUT
10) AUDIO IN/OUT
11) POWER Switch
12) VIDEO INPUT & LOOP OUT (1~16)
13) AC SELECT
14) AC INLET
7
8
9
10
Monitor output as composite signal.
Spot monitor output as composite signal.
RCA terminals for audio recording and
playback.
Main power switch.
Connect asynchronous video signal 1.0
Vp-p (75 ohm). Loop out is changed to
HI-Z automatically.
Select AC115V or 230V.
Input power voltage.
11
13
14
5
Hide quick links:
Advertisement
Table of Contents
