Jinergy JNMP60 Installation Manual page 4

2.2.16 The solar modules are recommended to be installed over a fireproof and insulating roof covering
when installed on a roof.
2.2.17 Module may not be contacted during working.
2.2.18 Please fixed the connecting cable to the bracket which avoid loose cable waggle.
2.2.19 It is forbidden to cable placed on the sharp edges.
2.2.20 The corresponding protection measures should be made for cable to prevent direct contact with
animals.
2.2.21 Excess gas that battery produced could cause explosion.
2.3 Installation matters needing attention
This document is only for internal use of JINNENG CLEAN ENERGY TECHNOLOGY LTD, and shall not be published or
copied without permission of the company.
210 40.5A
Table 2
Solar module (hereinafter referred to as the
"components") under the sun can produce more than
30V voltage. The voltage exceeds the safety voltage
range. So the electrical connection parts such as
improper operation which sparks cause fire, electric
shock, and even, so regardless of the component in
any case, don't direct contact with the terminal.
Module for outdoor use, can be installed on the roof,
vehicles, ships, etc. Installed in different attachments
should be used for mounting bracket. Do not remove
or moving components of any such as frame, glass,
label, junction box adhesion on the module parts.
Don't attempt to daub on the surface of the module or
paste any object.
Do not use a mirror, lens, or similar articles focus
sunlight onto the module.
In the process of transportation and installation of
module, please do not let the child contact and away
from
generation systems.
47.25A
modules and solar photovoltaic power