Summary of Contents for Sunrise Medical Zippie Q300 M Mini
Page 1
à votre disposition en format PDF sur le site : www.SunriseMedical.com. Veuillez vous rendre à la page de votre produit pour télécharger le manuel dans la langue souhaitée, ou contactez un fournisseur agréé Sunrise Medical. P/N 255249 Rev. A...
You can also register your product at: www.SunriseMedical.com/register FOR ANSWERS TO YOUR QUESTIONS Your Sunrise Medical authorized dealer knows your wheelchair best and can answer most of your questions about chair safety, use, and maintenance. For future reference, please fi ll in the following:...
® Zippie Power Seating II. TABLE OF CONTENTS INTRODUCTION ..................2 5.9 Swing in/out footrest adjustment ..........15 TABLE OF CONTENTS ................3 5.10 Angle adjustable center mount footrest ........15 5.11 Elevating legrest adjustment (option) ........16 USER INFORMATION ................4 5.12 Center mount hanger adjustment ..........16 1.1 This user manual ................4 5.13 Lap belt/seating positioning belt ..........17 1.2 For further information ..............4...
Do not use your wheelchair until this entire manual (all booklets) has been read and understood! If one of the user manuals was not included with your wheelchair, please contact your Sunrise Medical authorized dealer immediately. 1.2 For further information Please contact your Sunrise Medical authorized dealer if you have any questions regarding the use, maintenance, or safety of your wheelchair.
They must remain present and clearly legible throughout the entire lifespan of Fig. 2.1 the wheelchair. Replace or repair all illegible or damaged signs, symbols, and instructions immediately. Please contact your Sunrise Medical authorized dealer for assistance. Fig. 2.1: Warning – Maximum user weight for the wheelchair. Fig. 2.2: Warning –...
They are not brakes. items may cause your wheelchair to become unstable. Always keep your hands and body parts clear of moving parts to help The vent tray must be installed and maintained by a Sunrise Medical prevent injuries. authorized dealer.
- Imbalance - Seating disability We at SUNRISE MEDICAL have been awarded the ISO-13485 certifi cate, which affi rms the quality of our products at every stage, from R & D to production. This products meet the requirements in accordance with EU regulations.
DANGER! Many of the screws, bolts, and nuts on this system are special high-strength Use of a seating system not approved by Sunrise Medical may aff ect or fasteners. Use of improper fasteners may cause the system to fail. interfere with other parts of the system.
While operating any power seating function in latched mode use caution. In latch mode, powered seating will not stop until a reverse command is performed or the end of travel is met. Please consult a Sunrise Medical authorized dealer to receive training before using latch mode. Failure to do so may result in potential serious injury.
® Zippie Power Seating 4.0 WARNINGS FOR COMPONENTS AND OPTIONS 4.13 Transit DANGER! Important Transit notes for the chair: If possible and feasible, the rider should transfer to the Original Equipment Manufacturer (OEM) vehicle seat and use the vehicle restraint. If the seating system is used for transport, it must be used in a forward-facing seating position during travel in a motor vehicle.
Zippie Power Seating 5.0 SETTING UP THE SEATING SYSTEM The average wheelchair does not exist. This is why Sunrise Medical wheelchairs can be pre-set according to Fig.5.1 specifi c needs of the user. Pre-settings are carried out once, the fi rst time the wheelchair is going to be used. They must be executed by a qualifi...
® Zippie Power Seating 5.4 Seat pan and back size adjustments (Fig. 5.4 and Fig. 5.5) The Zippie Power seating system can be adjusted to a wide range of widths and depths to accommodate specifi c user needs. Seating dimensions should only be altered by a trained medical professional and may require a new seat pan, cushion, and/or stabilizer bar to complete the adjustment.
® Zippie Power Seating 5.6 Cantilever armrest (Fig 5.8 and 5.9) Adjusting armrest pad (forwards or backwards) Loosen the 2 bolts (S) on the armrest pad bracket. Move the armrest forward or rearward for a universal fi t. Tighten the hardware (S) when adjustment is complete. Adjusting armrest angle or leveling the armrest after height adjustment Loosen the pivot bolt (T) on the armrest angle bracket.
® Zippie Power Seating 5.0 SETTING UP THE SEATING SYSTEM 5.7 Pre-set fi xed / swing away controller Bracket depth of the controller (Fig. 5.10) Loosen (A) by one turn. Adjust (B) to the desired position. Tighten (A). See section 9 for specifi ed torque values. Height of the controller (1) (Fig.
® Zippie Power Seating 5.0 SETTING UP THE SEATING SYSTEM 5.8 Joystick controller position (Fig 5.13) The controller can be moved in or out in relation to the armrest. The controller can be moved to either side of the chair to accommodate left or right-hand use. WARNING! Be careful of pinching the controller cords.
® Zippie Seating 5.0 SETTING UP THE SEATING SYSTEM 5.11 Elevating legrest adjustment (Option) (Fig 5.16) Footplate height adjustment To raise footrest, loosen the two bolts (L) that hold the extension tube and footplate in place. Adjust the footplate up or down, and tighten the hardware (L). Calf pad adjustment Remove the securing screw (M).
® Zippie Seating 5.0 SETTING UP THE SEATING SYSTEM 5.13 Lap belt / seating positioning belt (Fig. 5.20) DANGER! This product is only to be used to position a single person in a wheelchair. Lap belts are not suitable for transit purposes. Approved occupant restraint systems must be used. Failure to heed these warnings may result in severe injury or death.
6.1 Getting in and out of the wheelchair (Transferring) Sunrise Medical recommends that you consult your health care provider for assistance in developing your personal front or side transfer technique to best suit your needs and avoid any personal injury.
® Zippie Power Seating 6.0 USING THE SEATING SYSTEM 6.3 Preparing for side transfer DANGER/WARNING! Move your system as close as you can to the seat you are transferring to. If possible, use a transfer board. Transfer as far back onto the seat surface as you can. This will reduce the risk that you will miss the seat or fall.
® Zippie Power Seating 6.0 USING THE SEATING SYSTEM 6.4 Headrest Removing/positioning the headrest (Fig 6.8) Lift (D). Slide (E) out of or into (F). Push (D) down. 6.5 Retractable and swing-away joystick mounts The joystick or enhanced display is mounted with a mechanism that allows the joystick to be locked in a forward or retracted position.
® Zippie Power Seating 6.0 USING THE SEATING SYSTEM 6.8 Dual-post height adjustable armrest (Option) (Fig 6.12) Flip-back operation Disengage lever (J) so front post is able to come free. Armrest can now be fl ipped back without armrest removal. Height adjustment (option) Release the upper securing lever (K).
Please stay clear of any powered actuator while the component is in motion. Sunrise Medical power mechanisms move over large ranges of travel. Users should be aware of their surroundings while Powered adjustable seating option Fig.
® Zippie Power Seating 8.0 REDUCING THE SEATING SYSTEM SIZE FOR TRANSPORTATION PURPOSES DANGER/WARNING! The wheelchair can be reduced in size for transportation without a passenger. Any components of the seating system that can be detached easily should be removed. Store away such components safely so that they can not cause injury or damage, or become damaged themselves.
® Zippie Power Seating 8.0 REDUCING THE SEATING SYSTEM SIZE FOR TRANSPORTATION PURPOSES 8.4 Dual-post height adjustable armrest (Option) (Fig 8.4) To remove armrest for transfer: Disengage levers (E and F) so front and rear posts are able to come free. Armrest can now be easily removed for transferring.
Sunrise Medical Service Center. Check chair for any missing or loose nuts, bolts, and/or fasteners. The contact details of your local Sunrise Medical Service Center can be found on Contact a Sunrise Medical authorized dealer if found.
* Daily = Before each use of the wheelchair. Quarterly = Every three (3) months. If fasteners are found to be loose a Sunrise Medical authorized dealer should tighten the fastener to the torque setting per size detailed below, unless stated otherwise in all appropriate owner’s manuals or instruction sheets (if applicable).
LEGAL RIGHTS IN ANY WAY. provide Model number, Serial number, description of what is required for service/ Sunrise Medical* provides a guarantee, as set out in the warranty conditions, for wheel- repair, and any additional information as to reason for service being performed to chairs to its customers covering the following.
Need help?
Do you have a question about the Zippie Q300 M Mini and is the answer not in the manual?
Questions and answers