JLG 100SX Operator's And Safety Manual page 24

SECTION 2 - PREPARATION AND INSPECTION
25. Cowling and Latches, Right Side - All cowling and
latches in working condition, properly secured, no
loose or missing part.
26. Turntable Bearing and Pinion - No loose or missing
hardware; no visible damage, evidence of proper
lubrication. No evidence of loose bolts or looseness
between bearing and structure.
27. Engine Air Filter - No loose or missing parts, no vis-
ible damage, element clean.
28. Battery - Proper electrolyte levels; cables tight, no
visible damage or corrosion.
29. Frame - No visible damage, no loose or missing
hardware (top and underside).
2-8
Figure 2-5. Daily Walk-Around Inspection Points - Sheet 2
– JLG Lift –
30. Drive Hub, Left Rear - No visible damage, no evi-
dence of leakage.
31. Wheel/Tire Assembly, Left Rear - Properly secured,
no loose or missing lug nuts, no visible damage.
32. Drive Motor and Brake, Left Rear - No visible dam-
age, no evidence of leakage.
33. Boom Sections - No visible damage; wear pads
secure. All cylinders - rod end shafts and barrel-end
shafts properly secured.
34. Rotator and Motor - Properly secured, no visible
damage, no evidence of leakage.
35. Platform Pivot and Slave Cylinder Attach Pins -
Properly secured; evidence of proper lubrication
where applicable.
3121809