Instructions For Use - Flex ADM 30 smart Manual

ADM 30 smart
Laser distance-measuring device ADM 30 smart
Temperature range
– for operation
– for storage
Lithium polymer battery
Weight
* The measurement range may be less under
unfavourable conditions (bright sunlight, reflective
surfaces). It is recommended to use a laser target
plate (optional).

Instructions for use

WARNING!
– Do not point the laser beam at people or animals.
– Do not stare into the laser beam.
– Do not place any optical instruments in the path of the
beam.
This measuring instrument generates laser radiation
which may cause blindness.
12
0 °C ... 40 °C
–20 °C ... 60 °C
500mAh/3.7V
0.38 kg
NOTE
The battery is supplied partly charged only. Before using
the device for the first time, fully charge the battery.
The most important operating steps are explained at the
end of these instructions on the illustrated pages.
See from page 124.
Switching the device on and off .......................... 124
Setting unit of measurement .............................. 126
Selecting reference point .................................... 128
Setting measuring mode .................................... 130
Linear measurement .......................................... 132
Continuous measurement .................................. 134
Switching acoustic signal on and off .................. 136
Switching light on/off .......................................... 138
Checking precision ............................................. 140