Remote Control - Electrolux EACS/I-HAV/N8_22Y EEC User Manual

Remote control

1
4
6
7
1 ON-OFF button;
2 MODE button— Operation mode selection;
3 «+» button — Increase in temperature;
4 «—» button — Decrease in temperature;
5 FAN button — Rotary fan speed;
6 MENU button— Menu opening;
7 SET button— Function selection;
8 SWING button— Blinds position selection;
9 TURBO button— Turbo mode selection.
1 ON/OFF
Press ON/OFF button. When the device
receives a signal, the operation mode
indicator . lights up on the indoor
unit display. The second button press
turns the device off. Turning the device
on or off disables the TIMER and SLEEP
function, but the pre-setting remains.
2 MODE
Pressing the button selects the operation
mode in the following sequence:
AUTO, COOL, DRY, HEAT, FAN. The
corresponding signs of modes appear on
the remote control display:
2
3
5
8
9
Note:
ABOUT AUTO MODE
When AUTO is selected, the LCD does
not display the set temperature, the air
conditioner automatically starts to work
in cooling or heating mode, creating a
comfortable room temperature.
3 ROOM TEMPERATURE SETTING BUTTON +
Used to increase temperature and timer
indicators. To increase the temperature,
press the button +
Continuous pressing and holding + button
for more than 2 seconds, respectively, is
quickly increasing the temperature until
the button is released. No temperature
control function in AUTO mode. Temperature
adjustment range: 16-30°C or 61-86°F.
4 ROOM TEMPERATURE SETTING BUTTON
—
Used to decrease temperature and timer
indicators. Continuous pressing and
holding the button — for over more 2
seconds, respectively, is quickly decreasing
the temperature until the button is released.
No temperature control function in AUTO
mode
5 FAN (ROTARY FAN SPEED SELECTION)
Pressing the FAN button changes the fan
speed in the following sequence:
Auto; "
" " – Lowest; "
" " – Average; "
" "– Highest.
" – quiet;
" – Low;
"– High;
7
ENGLISH