Device And Components; Inverter Technology; Air Conditioner Control; Remote Control - Electrolux EACS/I-HVI/N8 21Y EEC User Manual

6
www.home-comfort.com

Device and components

Indoor unit
Air intake
2
4
Air outlet
Outdoor unit
Air intake
Air outlet
1 Power cord.
2 Display.
3 Front panel.
4 Air filter mesh.
5 Horizontal blinds.
6 Vertical blinds.
7 Emergency start button.
8 Refrigerant pipes.
9 Insulation.
10 Drainage line.

11 Remote control.

12 Connecting track.
Note:
The figures in the Manual are based on the
standard model. Consequently, it may differ
from the air conditioner you have selected.

Inverter technology

EACS/I-HVI/N8_21Y EEC inverter air
conditioners Electrolux have the innovative
super DC compressor with a higher capacity
compared to traditional AC compressors.
Super DC inverter combines two control
modules: PAM - to cool the room as quickly
as possible, and PWM - to maintain the
temperature in the room with minimum
power consumption. This series belongs
to the highest energy efficiency class
"A+++/A+++". This means that the cooling
3
7
6
5 8
9
11
12
10
capacity is significantly higher than the
power consumption. This meets the strictest
EC requirements. Such significant energy
savings can significantly reduce your air
conditioner maintenance costs. Besides, an
air conditioner can be installed in places
with significant restrictions on electricity
consumption.
The inverter, when switched on, provides
the fastest possible air cooling. In a
stable operation mode, the air conditioner
accurately controls the room temperature
and maintains it at a set level.

Air conditioner control

• A wireless infrared remote control is used
for the air conditioner.
• A distance between the remote control
and the receiver on the indoor unit
should be within 7 m. Avoid any obstacles
between the remote control and the unit
which might hinder the signal.
• The remote control has to be at within 1 m
from the television and radio equipment.
• Do not drop or hit the remote control, and
do not leave it under direct sun rays.
Remote control
1. ON-OFF button;
2. MODE button— Operation mode selection;
3. «—» «+» button — Decrease /Increase in
temperature;
4. FAN button — Rotary fan speed;
5. TURBO button— Turbo mode selection.
6. BUTTON – Selecting the vertical louver