Automatic Cleaning Function; The Unit Control With A Mobile Application; Ambient Temperature Display - Electrolux EACS/I-HAV/N8_22Y EEC User Manual

When the function is active, the remote
control transmits the actual ambient
temperature to the air conditioner.
As a result, the air conditioner sets the preset
room temperature, guided by the remote
control temperature readings. When this
function is turned off, the air conditioner is
guided by the readings of the temperature
sensor in the split system indoor unit
AUTO HEATING 8 °C.
The function is used to automatically
maintain a home temperature of +8 °C.
To enable or disable it, the appropriate
function in the MENU should be selected
until the indicator appears on the remote
control screen;
AIR CONDITIONING POWER CONTROL
The power control function is designed to
limit the air conditioner power. When this
function is selected, the indicator
on the remote control screen; hold the SET
button for 5 seconds and the remote
control displays the following:
• The indicator -
decrease in the air conditioner power
• To disable this function, switch the button
SET until the indicator
• If the current power of the air conditioner
is lower than the maximum, the function
is enabled.
ENERGY SAVING MODE
press the "SET" button for 5 seconds to
turn on/ off the power saving function.
When this function is activated, the "SE"
indicator is displayed on the remote
control screen. The air conditioner
automatically adjusts the set temperature
according to factory settings to achieve
the best energy-saving effect. To turn off
the power saving mode, press the "SET"
button again.
7 TURBO
In COOL and HEAT mode the TURBO
MODE function turns on/ off by pressing the
TURBO button. When switched on, the icon
appears on the display.
When switching modes or increasing/
decreasing the fan rotary speed, the TURBO
MODE function is automatically disabled.
; blinks
shows the maximum
disappears.
Note:
ABOUT TURBO MODE
When this function switched on, the device
starts operating at maximum power for
faster heating or cooling the room.

Automatic cleaning function

With the unit off, hold down the MODE and
FAN buttons at the same time for 5 seconds to
turn the auto cleaning function on and off.
When the automatic cleaning function is
turned on, the indoor unit displays "CL".
During the automatic cleaning process of the
evaporator, the unit cools or heats up quickly.
Also, cold or warm air may blow from the air
conditioner.
Please make sure the room is well ventilated
during the cleaning process.
The unit control with a mobile
application
The unit can be controlled using the
HOMMYN mobile application provided by
IZTT LLC.
The Application Support Service is not
operated by Electrolux. You can learn more
about the HOMMYN mobile application at
www.hommyn.app.
For correct work of the unit in a Wi-Fi
network, a removable HOMMYN module
should be used, except when the unit is
supplied with a built-in control module. For
more details on the pre-installed control
module, see "Operation Manual".

Ambient temperature display

Pressing the "SWING" and "SET" buttons at the
same time shows the room temperature on the
indoor unit display.
9
ENGLISH