Electrolux EACS/I-HAV/N8_22Y EEC User Manual page 8

8
www.home-comfort.com
In Auto mode, the fan rotary speed is set
automatically depending on the difference
between the set and ambient temperature.
6 MENU
Menu opening button.
Press this button to open a submenu and
then press the button "SET" to select a
function. The submenu looks like this:
LIGHT (INDOOR UNIT DISPLAY LIGHT)
By selecting the indicator
DISPLAY BACKLIGHT function on the
indoor unit can be turned on/ off.
After disconnecting the device from the
power, the LIGHT should be reconnected.
SLEEP Used to set or cancel NIGHT
MODE. After turning on the device, the
night mode setting function should be
activated. After switching off the device,
all NIGHT MODE settings are canceled.
When the NIGHT MODE function is set,
the icon appears and numbers ,
, are shown on the remote control display,
or, depending on the function selected:
NIGHT MODE 1
— In cooling mode, the air conditioner
automatically increases the temperature
by 1 degree after the first and second hour
of operation. In heating mode, the air
conditioner automatically decreases the
temperature by 1 degree after the first and
second hour of operation. For example, if
in cooling mode you set the temperature
to 24 Сº and turned on the night mode,
then in the first hour of operation the air
conditioner increases the temperature
to 25 Сº, and in another hour - 26 Сº,
after which it continues to maintain a
temperature of 26 Сº for 6 hours. Working
in NIGHT MODE, the air conditioner saves
energy and maintains a comfortable room
temperature for sleeping.
NIGHT MODE 2
— The air conditioner changes the room
temperature according to the default
presetting.
NIGHT MODE 3
— This mode allows individual room
temperature setting for each hour for 8
hours.
— This function is unavailable in AUTO and
FAN modes.
TIMER ON
Selecting the TIMER ON indicator the
function of turning on the air conditioner
by timer is set. The icon
the display and blinks, at this moment a
blinking clock appears and the timer time
can be set. Within 5 seconds, while the hours
on the display are blinking, by pressing +
or –, button, the time can be increased or
decreased by 1 minute. By holding + or –
button for more than 2 seconds, the time can
be increased or decreased by 10 minutes.
After the time is on the clock is set, the icon
shows the current time. Press the SET button
to save the timer time. Now the time is set.
the
Pressing the SET button again cancels the
timer function. The icon
from the display. The timer is now disabled.
Before setting the timer, the clock should
be set to the current time.
TIMER OFF
Once the TIMER OFF indicator is selected,
the timer can be turned off.
CLOCK
selecting the CLOCK button, the icon
starts blinking on display. When the icon
or
be set by pressing the + or — button. After
setting the time, hold the SET button for
5 seconds to confirm By holding the +
or button — for over 2 seconds, the time
can be increased or decreased by 1 value
every 0,5 second. After disconnecting the
device from the power, the clock should
be set again. Once it is power supplied,
the icon
clock shows the current time or the set
timer indicator depending on the settings.
SWING UP AND DOWN (BLINDS
POSITION)
By choosing the indicator
the indoor unit blinds can be adjusted at the
angle required.
Once the indicator
position of the vertical blind of the air
conditioner can be set in the following
positions:
• Indicator blinks for 5 seconds. Press SET to
fix the selected position.
• Hold the SET button for 2 seconds to set
the slight blind wiggle.
I-FEEL
appears on the display and the clock
. The clock time can be set by
flashes, within 5 seconds the time can
appears on the display. The
, is selected, the
appears on
disappears
the position of