The Log-On Screen - General DataComm 551 Operating And Installation Instructions

OPERATION

The Log-On Screen

DC-551
REV : ******
NVRAM: Passed
RAM : Passed
ROM : Passed
Hit <CR> To Continue
3-8
When you access the CSU, or on CSU power-up or reset, the DataComm 551
log-on screen is displayed (see Figure 3-5). It displays the following in-
formation:
• system date (D D - M M M - Y Y )
• system time (H H : M M )
• firmware revision level (REV: revision)
• status of the CSU non-volatile memory (NVRAM: status)
• status of the CSU random access memory (RAM: status)
• status of the CSU read-only memory (ROM: status)
• CSU address number (CSU: 3-digit address)
Until it is set (using the Set Date function of the MAINTENANCE
screen), the date displayed is the firmware release date. After being set, it
is the true system date.
Until it is set (using the Set Time function of the MAINTENANCE
screen), the time displayed is the time elapsed since the CSU was powered
up or reset. After being set, it is the true system time.
DD-MMM-YY HH:MM
OOOOOOOOOOOOOOOOO
OOOOOOOOOOOOOOOOOO
OOOO
OOOO
OOOOOOOOOOOOOOOOOO
OOOOOOOOOOOOOOOOO
OOOO
OOOOOOOOOOOOOOOOOO
OOOOOOOOOOOOOOOO
FIRMWARE REVISION LEVEL
MEMORY STATUS MESSAGES
CSU : ***
:
FIGURE 3-5. LOG-ON SCREEN
OOOO
SYSTEM DATE
OOOO
SYSTEM TIME
OR
OOOO
POWER-UP/RESET ELAPSED TIME
OOOO
OOOO
OOOO
OOOO
(R) GENERAL DATACOMM INC
CSU ADDRESS
.