Table of Contents
Advertisement
Read before using this technical manual or installing subject equipment.
This equipment complies with Part 68 of the Federal Communications Commission (FCC) Rules
and Regulations. Connection of data communication equipment to the public telephone network
is regulated by the FCC Rules and Regulations. These regulations require:
A.
To connect the DC 551 to the Public Telephone Network you are required to give the
Telephone Company the following information.
1. The FCC Registration Number which is AG6 97J-60491-DE-N.
2. The FIC (Facility Interface Code) which is 04DU9-B and or 04DU9-C.
3. The SOC (Service Order Code) which is 6.0F.
4. The Telephone Company jack type which is RJ48C.
B.
If you experience trouble, disconnect the equipment from the telephone line to determine if
the equipment is malfunctioning. If it is, remain disconnected until the problem is
corrected. Should this equipment cause harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible they will notify you in
advance. But if advance notice is not practical, you will be notified as soon as possible. You
will be informed of your right to file a complaint with the FCC.
C.
The telephone company may change its communication facilities, equipment, operations,
and procedures where reasonably required for operation. If this occurs, the telephone
company will notify you in writing.
D.
It is the user's obligation to notify the telephone company prior to disconnecting equipment
from 1.544 Mbps digital service.
E.
According to Part 68 of the FCC Rules and Regulations, customers are not authorized to
repair or modify this equipment. Any repair or modification will null and void the FCC
registration and the warranty of this equipment.
FCC-REQUIRED NOTIFICATION
FOR USERS OF FCC-REGISTERED EQUIPMENT
Rev. 3, January 1992
Advertisement
Table of Contents
