STATIC SENSITIVE DEVICES
PROPER HANDLING AND GROUNDING
PRECAUTIONS REQUIRED
This equipment contains electrostatic sensitive devices. Use ESD pre-
cautionary procedures when removing or inserting parts or printed circuit
(pc) cards. Keep parts and pc cards in their antistatic packaging material
until ready to install.
The use of an antistatic wrist strap, connected to the grounded
equipment frame or chassis, is recommended when handling pc cards
during installation, removal, or setting of on-board option switches. Do
not use a conductive tool, such as a screwdriver or paper clip, to set the
position of the option switches.
INSTALLATION SAFETY INSTRUCTIONS
a. Never install telephone wiring during a lightning storm.
b. Never install telephone jacks in a wet location unless the jack is specifically
c. designed for wet locations.
d. Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
e.
Potentially hazardous voltages exist within this unit.
ATTENTION!
CAUTION