Shock Installation
Your Lando comes with all of the hardware
●
necessary to support the shock supplied with the
frame. When removing or re-installing the shock, be
sure of the order of all of the spacers, bushings, and
O-Rings
Always re-apply blue thread locker to all threads in
●
the shock assembly.
●
Shock bolts should be torqued to 8 Nm
●
If you choose to use a different shock then the one
supplied with your frame, please contact Factor for
details on spacer and bushing requirements. The
hardware used it quite standard, and should fit most
major brands shocks.