Inserting A Battery In The R&S Tsma-Bp Battery Pack Unit - R&S TSMA-BP Getting Started

®
R&S TSMA-BP
Check the equipment for completeness using the delivery note and the accessory
lists for the various items. Check the instrument for any damage. If there is dam-
age, immediately contact the carrier who delivered the instrument. Make sure not
to discard the box and packing material.
Packing material
Retain the original packing material. If the instrument needs to be transpor-
ted or shipped at a later date, you can use the material to protect the control
elements and connectors.
Accessory list
The following items are included with shipment of the R&S TSMA-BP Battery
Pack Unit:
● R&S TSMA-BP Battery Pack Unit (R&S TSMA-BP, R&S No. 1523.8009.02)
The following items are optional and must be ordered separately:
● Battery for R&S TSMA-BP Battery Pack Unit (R&S TSMA-BAT, R&S
No. 1523.8021.03)
Li-ion battery RRC2054 (15.0 V / 3200 mAh, 48.0 Wh)
● Charger for batteries (R&S TSMA-BC2, R&S No. 1523.8015.02)
Dual charger for batteries including country specific power cord
Model: RRC PMC02A
U = 100-240 V AC, max. 65 W
in
Only Li-ion battery of the type RRC2054 may be used!
4.2 Inserting a Battery in the R&S TSMA-BP Battery
Pack Unit
In order to run the R&S TSMA via battery pack, insert the batteries into the R&S
TSMA-BP Battery Pack Unit.
Getting Started 1177.5885.02 ─ 05
Inserting a Battery in the R&S TSMA-BP Battery Pack Unit
Preparing for Use
10