Connecting The R&S Tsma-Bp Battery Pack Unit With R&S Tsma - R&S TSMA-BP Getting Started

®
R&S TSMA-BP
Connecting the R&S TSMA-BP Battery Pack Unit with R&S TSMA
Make sure, that the batteries are inserted in the correct orientation.
Figure 4-1: R&S TSMA-BP Battery Pack Unit - Battery Orientation
1 = Battery insert orientation
4.3 Connecting the R&S TSMA-BP Battery Pack
Unit with R&S TSMA
In order to use the R&S TSMA with the R&S TSMA-BP Battery Pack Unit, the fol-
lowing steps must be performed.
The R&S TSMA-BP Battery Pack Unit may be used only with closed battery
cover.
1. Attach the R&S TSMA base unit with the bottom side (see
of the R&S TSMA-BP (see
Getting Started 1177.5885.02 ─ 05
Figure 4-2).
Preparing for Use
Figure 4-3) on top
11