Before The First Use - Domo DO42101SV Instruction Booklet

BEFORE THE FIRST USE

To set up the machine properly, please follow the steps below:
 Straighten the handle of the stick vacuum until it clicks into position.
 Make sure that the floor nozzle is clicked on tightly to the stick vacuum cleaner.
 Assemble the vacuum cleaner to contain filters - never use without filters.
CHARGING
 Completely assembled appliace you can start charging the vacuum cleaner.
 The handheld vacuum cleaner must be inserted in the stick vacuum cleaner.
 Attach the charger to the in-built connector.
 Put the stick vacuum cleaner near the socket and connect it. Make sure it all is stable.

level indicator will now light up and indicate when the machine is
The battery
fullycharged.
 When fully charged, the lights go out - charging complete. If you switch on the
vacuum cleaner, all the indicators (full scale) will light up.
USE
 Press the on-off switch on the handle to turn the machine on. When you switch on the
machine, the rotating floor brush at the bottom of the floor nozzle will begin to turn.
This will cause the dirt in the opening to be shifted and thereby vacuumed up. The
dirt will be collected in the dust reservoir of the hand-held vacuum cleaner.
 Press the speed control to increase or lower the suction power.
 Press the release button on the hand-held vacuum cleaner to remove the hand-held
vacuum cleaner and only use the hand-held vacuum cleaner.
 To use just the hand-held vacuum, press the on-off switch on the hand-held vacuum
cleaner.
 The machine is equipped with a safety which will ensure that the machine shuts itself
off if, for example, objects which are too large are sucked up, or if fingers become
tangled in the floor brush. This is for personal safety and to protect the motor. To
reverse the floor brush, press the on/off button again or press the speed control.