Time And Date Settings; System Configuration Backup And Restore - Thecus N199 User Manual

System Logs
Item
Truncate All Log File
|<< < > >>|
INFO
WARN
ERROR
GO
Ascending
Descending
Download All Log File

Time and Date Settings

From the System menu, choose the
Time item and the Time screen
appears. Set the desired Date, Time,
and Time Zone. You can also elect
to synchronize the system time on
the N199 with an NTP (Network
Time Protocol) Server. You can
change any of these items and press
Apply to confirm your settings. See
the following table for a detailed
description of each item:
Time
Item
Date
Time
Area
City
NTP Server
WARNING

System Configuration Backup and Restore

From the System menu, choose the
Config Mgmt item and the System
Configuration Download/Upload
screen appears. From here, you can
download or upload stored system
configurations. See the following
table for a detailed description of
each item.
Description
Clear all log files.
Use the forward ( > >>| ) and backward ( |<< < ) buttons
to browse the log pages.
Provides all log information including warning messages and
error messages.
Shows all warning messages and error messages.
Shows only error messages.
Specify the number of lines per page and press Go.
Shows logs by date in ascending order.
Shows logs by date in descending order.
Export all logs to an external file.
Description
Sets the system date.
Sets the system time.
Select your area.
Select your city.
Select Yes to allow the N199 to synchronize with the NTP server
shown below.
Select Maually to allow the N199 to synchronize with an NTP
server of your choice.
Select No to not have the N199 to synchronize with an NTP
server.
If an NTP server is selected, please make sure your N199's network has been setup
to access the NTP server.
37