Setting Up An Nsync Target On Another Device; Designating N199 As An Nsync Target - Thecus N199 User Manual

2. On the Nsync server, grant that user (ex. nsyncsource1) write access to
the nsync folder. For instructions on how to set up a folder's ACL, see
Chapter 4: System Management > Folder Management >
Access Control List
3. Once this is done, the target server will start accepting Nsync tasks from
server using that ID and password.

Setting Up an Nsync Target on Another Device

If you selected "Other Device" when setting up your Nsync task, the N199 will use
the FTP protocol to back up the share folder. On the external storage device,
make sure there is a folder named "nsync", and the Auth ID has writable
permission in that folder.

Designating N199 as an Nsync Target

The N199 can act as an Nsync server,
enabling another Nsync-equipped
Thecus NAS at a remote location
backup their files to this N199. From
the Network menu, choose the
Nsync Target item, and the Nsync
Target Server Setting screen
appears.
Nsync Target Server Setting
Item
Nsync Target Server
Apply
Cancel
NOTE
(ACL).
Description
Enable or Disable Nsync Target support.
Click Apply to save your changes.
Click Cancel to cancel your changes.
To enable Nsync task to go thru firewall, you have to open port TCP/1194 on your
firewall in both directions.
71
Folder