Remove & Return; Removing The Product; Packing The Product; Disposing Of The Product - Alpha ESS SMILE-T10-HV-INV User Manual

zz
Your Smart Energy
Remove & Return

8.1 Removing the Product

Procedure
Step 1 Power off the product by following the instructions in section 0 Powering Off the Product.
Step 2 Disconnect all cables from the product, including communication cables, PV power
cables, battery cables, AC cables, and PE cables.
Step 3 Remove the WiFi module from the inverter.
Step 4 Remove the inverter from the mounting bracket.
Remove the Battery pack from the mounting bracket.
Step 5 Remove the mounting bracket.

8.2 Packing the Product

If the original packaging is available, put the battery pack or inverter inside it and then
seal it using adhesive tape.
If the original packaging is not available, put the battery pack or inverter inside a
suitable cardboard box and seal it properly.

8.3 Disposing of the Product

If the battery pack or inverter service life expires, dispose of it according
to the local disposal rules for electrical equipment and electronic
component waste.
Dispose of the packaging and replaced parts according to the rules at
the installation site where the device is installed.
Do not dispose the inverter and the battery pack with normal domestic
waste.
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 37 of 43