Alpha ESS SMILE-T10-HV-INV User Manual page 35

zz
100059 Grid_current_sampling_abnormal 1. Confirm whether Grid is distorted severely.
100060 Dsp_selfcheck
100061 Grid_short_time_over_current
100062 Bat_overvolt_hardware_fault
7.2.2 Battery Protection Description
Protection
LED Indictor
Code
1
3
4
Yellow LEDs
5
flash once
every 1S.
6
8
9
11
___________________________________________________________________
2.Check whether PV cable is damaged.
2.Check whether PV cable connection is reli-
able.
Restart inverter and ensure whether the fault
is existing.
1. Confirm whether Grid is distorted severely.
2.Check whether PV cable connection is reli-
able.
1. Check whether battery breaker has tripped
off.
2. Check whether battery is damaged.
Description
LED Display
Temperature differ-
ence
High temperature
Low-temperature
discharge
Over-current charge
Over-current dis-
charge
Cell overvoltage
Cell under voltage
Low-temperature
charge
Alpha ESS Co., Ltd.
Your Smart Energy
Troubleshooting
Wait for automated recovery.
In case the problem is not
recovery for a long time, call for
service.
Stop discharging and charging
until this code is eliminated and
Wait for the temperature to drop.
Stop discharging until this code is
eliminated and Wait for the tem-
perature to rise.
Wait for automated recovery.
In case the problem is not
recovery for a long time, call for
service.
See NOTE or call for service
Stop charging until this code is
eliminated and Wait for the tem-
perature to rise.
Page 35 of 43