Table of Contents
Advertisement
Custom VKP 80II and 80III (roll printer)
Maintenance
The regular cleaning of the device keeps the print quality and
extends its life. The following recommendations should be kept:
Every roll change
• Clean printing head
• Rollers
Every 5 roll changes
• Cutter
• Cutter compartment use compressed air
• Paper path
• Sensors
Card Reader
Transmac SCR28I-SM33U
The lifecycle of the magnetic head is about 500,000 passes and the lifecycle of the chip contact
is about 300,000 contacts.
Cleaning process
80% of all equipment failure is caused by the non-regular cleaning of the card reader system.
Cleaning cards are specially designed for these readers/encoders to allow for preventative
maintenance without dismantling the system.
To ensure a proper and failure-free operation of the system, we recommend a regular cleaning
by using CLEANING CARDS. Please get in contact for further information on cleaning cards.
Barcode Reader
Zebex Z-5160 USB
This middle range scan module needs no servicing as there are no moving parts. If it is operated
in a dusty area, it may necessary to clean the front of the scanner more often to prevent losing
scanning performance.
Cleaning process
Remove the scanner from its mounting plate by removing three screws. After that, clean the
optic sensors with the help of a cotton wool bud.
Manual Go4Platin_en COMPLETE.docx / BG
use isopropyl alcohol
use isopropyl alcohol
use compressed air
use compressed air
use compressed air
31
Advertisement
Table of Contents
