Table of Contents
Advertisement
Transact Epic 880 TM (roll printer)
Cleaning the Print Head
Once the unit is opened, the paper path is accessible for cleaning or clearing paper. Use a
soft brush to clean the paper dust from inside the printer. The paper dust should also be
removed from the sensor optics. If streaking on the printed ticket is evident, the thermal
print head may need to be cleaned. This can be done with a cotton swab moistened with
an alcohol solvent (ethanol, methanol, IPA).
ATTENTION:
After printing, the print head can be very hot. Be careful not to touch it and let it cool
down before you clean it. Do not damage the print head by touching it with your
fingers or any hard object.
Manual Go4Platin_en COMPLETE.docx / BG
29
Advertisement
Table of Contents
