Table of Contents
Advertisement
Coin mech does not
recognize coins
Banknote reader
does not recognize
banknotes
Coin mech and
banknote reader do
not work
Manual Go4Platin_en COMPLETE.docx / BG
-
-
Clean coin mech
-
Check connector from coin mech if it's correctly plugged in
Check if currency is correct in test mode – hardware settings
and if channels are shown, if not, coin mech must be
replaced
-
-
Clean banknote reader
Check connector from banknote reader if it's correctly
-
plugged in
If LED on banknote reader red or does not light, it must be
replaced
-
Check I/O controller plug (50 pin) on PC
12
Advertisement
Table of Contents
