Table of Contents
Advertisement
11 – Exchanging Data with a Computer
Exporting tracks
You can export tracks as 16-bit, 44.1-kHz
mono WAV files.
1 When the recorder is stopped, press the
key to open the
MENU
2 Turn the
wheel to select
DATA
, and press the
EXPORT
the
IMPORT /EXPORT
3 Turn the
wheel to select the
DATA
item, and press the
TRACK
Song tracks that have audio recordings are
displayed in a list. The file name makes
the source track number clear.
TIP
Press F3 (NAME) to change the file name.
NOTE
Song tracks that do have audio recordings
are not displayed in the file list.
4 Turn the
wheel, to select a track for
DATA
export, and press the
check in the checkbox.
76
TASCAM DP-008
screen.
MENU
IMPORT /
(¥) key to open
F4
menu.
EXPORT
(¥) key.
F4
(
) key to put a
F4
✔
By checking multiple checkboxes, you
can export more than one track at once.
Select a track and press the
key again to remove the check from its
checkbox.
5 When you finish putting checks next to
the tracks that you want to export, press
the
key.
F2 (
)
NEXT
The amount or open space on the FAT
partition (which is the destination for the
exported tracks) and the total number of
tracks to be exported is shown.
6 Press the
F4 (
)
EXEC
track is exported to the FAT partition
with the edited file name with the
".WAV" extension added as the track file
name. If you have previously exported a
track file with the same name, a confir-
mation message ("
Dup l icate name
") appears. Press the
you sure?
key to overwrite the older track.
7 Press the
key to return to the
HOME
Home Screen.
8 Connect this unit to a computer (see
"Connecting with a computer" on page
71).
(
)
F4
✔
key. The selected
–
Are
F3 (
)
YES
Advertisement
Table of Contents
