Table of Contents
Advertisement
5 – Song Management
A default song name like
given to the new song. The asterisks
indicate a number. In the example above
the name is
SONG005
4 Change the song name as necessary (see
"Editing names" on page 37).
TIP
You can rename a song later by selecting
NAME EDIT from the SONG menu. You can
also edit the song name when saving it.
5 Press
to save the currently
F2 (
)
EXEC
loaded song and create the new song.
6 Press the
key to return to the
HOME
Home Screen.
Saving a song
This unit automatically saves the current song
during shutdown and when loading another
song, for example. You can also save a song at
any time using the following procedures.
1 When the recorder is stopped, press the
key to open the
MENU
2 Turn the
wheel to select
DATA
press the
(¥) key to open the
F4
menu screen.
3 Turn the
wheel to select
DATA
press the
(¥) key.
F4
The
screen appears.
SONG SAVE
38
TASCAM DP-008
is
SONG***
.
screen.
MENU
, and
SONG
SONG
, and
SAVE
4 Change the song name if you want and
then press the
F2 (
EXEC
names" on page 37).
5 Press the
key to return to the
HOME
Home Screen.
Viewing song information
You can check the name, partition and
remaining recording time of the currently
loaded song.
1. Press the
key to open the
MENU
screen.
2. Turn the
wheel to select
DATA
and press the
INFORMATION
This opens the
SONG ( 1 /3)
screen, which shows the
INFORMATION
name and remaining recording time of the
current song.
NOTE
The INFORMATION screen has three pages,
including SONG (1/3), CARD (2/3) and F/W
(3/3). Use the F1 (PREV) and F4 (NEXT) keys
to change the page (see "Viewing infor-
mation" on page 66).
Copying songs
Songs in the currently active partition can
be copied to the same and different MTR
partitions. Multiple songs can also be copied
at once.
key (see "Editing
)
MENU
(¥) key.
F4
page of the
Advertisement
Table of Contents
