Table of Contents
Advertisement
Use the TRACK 1 PAN knob to set the stereo
position of the track signal.
Record guitar to TRACK 2
Now, you will record lead guitar on
while listening to the rhythm guitar on
. Use the following procedures to change the
1
recording source for
TRACK 2
1 Press the
key to open the
ASSIGN
screen.
ASSIGN
2 - Quick Start Guides
TRACK 2
TRACK
.
INPUT
Set which input (INPUT A or INPUT
B) is to be the recording source for each
track. In the initial setting,
is assigned as the recording source for
tracks 1, 3, 5 and 7, and
is assigned as the recording source for
tracks 2, 4, 6 and 8.
blinks showing that the track is in record
standby.
When you play the guitar, the input
level is shown by the
(TRACK 2) meters on the display.
(
)
INPUT A
A
(
)
INPUT B
B
key to set the
.
(INPUT A) and
A
2
17
TASCAM DP-008
Advertisement
Table of Contents
