Exporting Tracks - Tascam DP-004 Owner's Manual

Exporting tracks

You can export tracks as 16-bit, 44.1-kHz mono
WAV files.
1 With the transport stopped and the Home Screen
open, press the
MENU
Turn the wheel to select
DATA
(¥) key to open the
WAVE
2 Turn the wheel to select the
DATA
item, and press the
F4
have audio recordings are displayed in a list. The
file name makes the source track number clear.
NOTE
Song tracks that do have audio recordings are not
displayed in the file list.
3 Turn the wheel, to select a track for export,
DATA
and press the ( ✔ ) key to put a check in the
F4
checkbox.
11–Exchanging Data with a Computer
key to open the screen.
MENU
, and press the
WAVE
menu.
EXPORT TRACK
(¥) key. Song tracks that
By checking multiple checkboxes, you can export
F4
more than one track at once. Select a track and
press the F4 ( ✔ ) key again to remove the check
from its checkbox.
4 When you finish putting checks next to the tracks
that you want to export, press the
amount or open space on the FAT partition (which
is the destination for the exported tracks) and the
total number of tracks to be exported is shown.
TIP
In step 3 above, if you press the F2 (NEXT) key after
selecting a track but before putting a checkmark next to
any track, the selected track is exported alone.
key. The
F2 ( )
NEXT
99
TASCAM DP-004