Table of Contents
Advertisement
or insert the card. If you remove or insert
the SD card when the unit's power is
on, the unit cannot shut down properly
and all unsaved data and settings will be
lost. These data and settings cannot be
recovered.
•
Do not remove the batteries or
disconnect the power cable while the
unit power is ON.
•
The included alkaline batteries are for
confirming operation of the unit and
might not last very long.
•
Before turning the power ON, completely
turn down the volume of headphones
and monitoring systems connected to the
unit.
TIP
•
This unit can also be powered by a
PS-P520 power adaptor (sold separately)
(see "Connecting an AC adaptor (sold
separately)" on page 32).
•
You can monitor recordings using
speakers by connecting an amplifier or
powered speakers to the LINE OUT jacks.
Playing and mixing the demo
song
Before the unit is shipped, a demo song is
stored on its SD card. We are now going to use
basic playback and mixing features with this
demo song.
1 Press the
key to open the Home
HOME
Screen.
2 – Quick Start Guides
2 When the Home Screen is open, press the
key to open the
MENU
3 Use the
DATA
menu, and press the
the
SONG
4 Rotate the
press the
screen that shows a list of songs.
LOAD
screen.
MENU
wheel to select the
(¥) key to open
F4
menu screen.
wheel to select
DATA
¥
key to open the
F4 (
)
TASCAM DP-008
SONG
, and
LOAD
SONG
11
Advertisement
Table of Contents
