Loading The Demo Song; Loading The Audio Demo Song - Tascam SX-1 Quick Start Manual

Chapter 3 –Making Connections

Loading the Demo Song

The SX-1 ships with two demonstration songs: an
audio and a MIDI demonstration. If your monitors
are connected properly, you can load the song as
described here, press
Note that when you load either of the demo songs,
the actual demo song does not load. What happens is
that the SX-1 automatically makes a copy of the song
and loads that copy instead (meaning that there is
always a "clean" demonstration song available). If

Loading the Audio Demo Song

From the
1
MAIN DISPLAY MODES
the SX-1's front panel, press
page will appear.
Project
18
TASCAM SX-1 Quick Start Guide
and you hear the song.
PLAY
section on
. The
PROJECT
you want to keep the copy after you have worked on
it, unless you save it with another name (which does
not include "Demo" as part of the name!), it will be
overwritten next time you load the demo song.
TIP
For the following examples, if you are using an external
VGA, make sure the MAIN DISPLAY key above the
LCD ACCESS section is set to <EXTERNAL> (this
LED is lit).
In the project tab, on the currently
2
MANAGE
displayed screen, select the project titled
.
Audio Demo
SX-1