Keimling Naturkost PB 150 Operation Manual page 47

Personal Blender™ - the speedy blender
Troubleshooting
Problem Possible reason
The motor unit Juice or some other liquid
continues to run has got into the motor unit
and the transpar- and has caused the pressure
ent connecting switch to stick.
ring on the motor
unit continues to
turn even though
the blender/grind-
er unit has been
removed from the
motor unit.
The motor unit will The blending/grinding attach-
not start. ment and the blending/grind-
ing container are not firmly
screwed together.
You are not pushing down
firmly enough on the blend-
er/grinder unit in the direc-
tion of the motor unit.
The connecting parts on the
motor unit and blender/grind-
er unit are not correctly seat-
ed inside one another.
Solution
Disconnect from the power supply.
Clean the motor unit and pressure
switch thoroughly and try again.
Take the blender/grinder unit apart
again and screw it together once
more. Ensure that everything is really
firmly screwed together. Try again.
Try again.
Disconnect the blender/grinder unit
from the motor once again. Turn the
rubber wheel on the blending/grind-
ing attachment slightly and replace
the unit on the motor unit. The parts
should now slide easily together.
47