Tools And Accessories Which Are Needed; Additional Accessories; Miscellaneous; Tools - Siemens CI24R Series Installation Instruction

Tools and accessories which are needed

Scope of delivery

Installation manual

Operating instructions

Installation accessories

Additional accessories

Installation accessories for side-by-side installation
For permanent connectio n of two appliances,
e.g. a freezer next to a refrigerator.
Lateral additional heating
Necessary when the distance between two appliances
is less than 160 mm.
Connecting element for furniture doors
For connecting two furniture doors (see explanation
Section "4. Preparing the furniture doors"). It can b e
used for standard height furniture doors without an y
preparation work.

Miscellaneous


Step ladder

Trolley, wheelbarrow or sack barrow

Hammer drill for drilling holes into the wall and f loor

Various size drills for various materials

Wood plank, (min. 8 x 10 cm) as an alternative anti
tip device. Length should correspond to the width
of the installation niche.

Various size wood screws

Screw (M8, at least 80 mm long), nut

Thin (1.5 mm), material suitable for protecting the
floor against damage (e.g. linoleum)

Suitable material for covering and protecting the
cabinets (e.g. protective film)

Adhesive tape
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work
surfaces.
All manuals and user guides at all-guides.com
in
-

Tools

Rechargeable screwdriver
T20 Torx-bit magnetic
holder
T20 Torx screwdriver
8 mm socket wrench
Various size drills
Fixed spanner SW 13 mm
Water pump pliers
Adjustable spanner
Knife with an adjustable
blade
Metal tape measure,
folding ruler
Angle of contact
60 cm and 120 cm spirit
levels
Level, min. 120 cm long
V