Tensioning The Hinge Springs - Siemens CI24R Series Installation Instruction

Only in the case of individual appliances:
1. Screw on the angle (a) for fastening the cover ri
2. Attach the cover ribs (c) to the fastening sheets (b)
and the angles (a).
Only in the case of a side-by-side set up:
Insert the cover rib in the crack between the appliances.
The cover rail is included in the installation acce
for side-by-side installation.
OQ
All manuals and user guides at all-guides.com
3.
bs.
Turn the setting screw with a cross head screwdrive
Installation of the appliance is now complete.
ssories

Tensioning the hinge springs

I = Spring tensioned
0 = Spring released
These are special installation steps.
Instructions are provided after
section D.

Ice water dispenser, see "Aligning
ice and water dispenser".

Cover strips for the wine cooler, see
"Attaching covering strips"

Door opening angle see "Setting the
door opening angle".
r.