Installation Possibilities; Stand Alone Appliance; Side-By-Side Set Up; Stand Alone Appliance With Dividing Wall - Siemens CI24R Series Installation Instruction

Installation Possibilities

Various installation possibilities are available.
These are only limited by the kitchen design and th
finger protector function.

Stand alone appliance

Side-by-Side set up

All manuals and user guides at all-guides.com
e
Stand alone applianc
wall

When measuring the dividing wall for model 4, pay
attention to the thickness of the furniture front to be
mounted in order to avoid damage when opening
doors at the same time.

If the distance between the appliances is less than
160 mm, the auxiliary side heater must be used.
For further information see section "Tools and
Accessories which are needed".

The minimum thickness of the dividing walls
is 16 mm.
Stand alone appliance as an end
section to a row of kitchen units
If a side of the appliance is visible, use a side co
The side covering must be co
the floor and the upper cupboards before the applia
is slid into the installation niche.
The dimensions of the side covering are governed by
the opposing niche wall. During
that the installation niche has right angles and ha
exact size necessary for the appliance.
e with dividing
vering.
nnected firmly to the wall,
nce
installation, make sure
s the
R