Fastening The Appliance To The Side Wall Of The Installation Niche; Checking That The Finger Guard Moves Easily - Siemens CI24R Series Installation Instruction

3. If there enough room on the top of the appliance f
the the lateral bars of the fastening sheets (above)
to the side of the niche.
4. Cut the connection ribs (a) to the desired height!
5. Press connection ribs (a) into the covering ribs.
6. Attach the covering ribs (b) onto the fastening
sheets (above),
Note:
If the installation is side-by-side, connect the cov
of both appliances using the bolt from the installation
accessories for side-by-side installation.
NS
All manuals and user guides at all-guides.com
ix
3.
Screw on the bars of the fastening sheets (lateral)
with the cabinet parts lo cated next to them.
Note:
In the case of a Side-by-Side installation this inst
step is not possible. These parts have been removed
4.
It is now essential to chec
easily. At a later time any required corrections wi
more difficult.
Note:


1.
er rails
Fastening the appliance to the side
wall of the installation niche
Checking that the finger guard
moves easily
k that the finger guard moves
The supplied finger protector can be used for both
sides of the hinges.
Because of different installation possibilities, th
finger protector has to be shortened to the require
length.
Shorten the finger protector at the upper side
above the covering strip by 55 mm (
allation
.
ll be
e
d
NK ).