Preparing The Water Connection; Connecting The Appliance To The Water Supply - Siemens CI24R Series Installation Instruction

12. Press appliances completely together by gripping
the installation aids with water pump pliers.
13. When the appliances have been pushed
completely together, push the bar from above
through the connection clamps.
14. Press appliances completely together by gripping
the appliance base with water pump pliers.
15. When the appliances have been pushed
completely together, push
through the connection clamps. Use a suitable tool
to insert the bar all the way.
16. Remove installation aids.
PM
All manuals and user guides at all-guides.com
the bar from the front

Preparing the water connection

(only for appliances which require a water connection)
Note:
Turn off the main water tap in order to avoid damag
from escaping water.
1. Connect connection line
2. Lay the connection pipe. Al ways keep to the given
installed area in order to avoid damaging the
connection pipe when slid ing the appliance in later.
Connecting the appliance to the water
supply
Note:
Do not kink the connection pipe when bending it,
otherwise there is a risk of leaks and water damage
1. Remove the plugs from the appliance connection
(1.).
2. Lay the water hose such that it ends at the
appliance connection ( 2.).
3. Slide the union nut and the sealing element onto
the water hose.
4. Attach the water hose to
and screw on the union nut ( 3.). Screw tightly, using
manual force.
5. Screw the union nut tightl y using the fi xed spanner.
Do not over tighten!
6. Push water hose back as far as possible into the
protective pipe ( 4.).
e
to the shut-off valve.
.
the appliance connection