Installing The Appliance; Installation Location; Atmosphere Grades; Stable Installation - Siemens CI24R Series Installation Instruction

Installing the appliance

Installation location

ã Caution:
The appliance is very heav y. Data relating to the
weight when empty is found in the following
table:
Appliance
Refrigerator 60.3 cm
Refrigerator 75.6 cm
Freezer 45.1 cm *
Freezer 60.3 cm *
Freezer 75.6 cm *
Wine storage cabinet 45.1 cm
Wine storage cabinet 60.3 cm
* without water and ice dispenser
The appliance should be installed in a dry, well
ventilated space.
The location should not be exposed to the direct
sunlight and should not lie next
as a cooker or a radiator etc. If installation next
source of heat cannot be avoided, either a suitable
insulating plate should be used or you should keep
the following minimum distances:

3 cm to electric or gas cookers.

30 cm to an oil-fired or solid-fuel cooker.
The floor of the installation location must not give way;
if required, reinforce floor. To ensure that the ice maker
functions correctly, the appliance must be upright.

Atmosphere grades

The climate class can be found on the rating plate.
The climate class indicate s within which ambient
temperatures the appliance can be operated.
Climate class Permitted ambient
temperature
SN +10 °C to 32 °C
N +16 °C to 32 °C
ST +16 °C to 38 °C
T +16 °C to 43 °C
S
All manuals and user guides at all-guides.com
Weight (empty)
approx. 131 kg
approx. 145 kg
approx. 109 kg
approx. 131 kg
approx. 145 kg
approx. 109 kg
approx. 131 kg
to a source of heat such
to a
to

Stable installation

The appliance is very heavy and has a tendency to t
forwards when the appliance door is opened.
The appliance must not be switched on until there
is no possibility of the appliance tilting over.
The safest method of installi ng the appliance in a stable
position is to use the supplied anti-tilt brackets.
If the installation cavity is adequately stable and the
appliance can be attached securely to the upper and
side walls of the cavity, it may be possible to dis
with the anti-tilt brackets. A prerequisite for this is
always a firm connection between the cavity and bac
wall!
In the case of doubt, the help of architect or speci
builder should be enlisted.

Installation niche

It is important to keep to the stated dimensions of the
installation niche with a view to trouble-free fitting, and
the subsequent appearance of the kitchen furniture
frontage.
Special care should be taken that the niche has rig
angles. The side walls should not exhibit areas tha
stick out, projections or unevenness.
You should determine the right angles of the instal
niche with appropriate me ans, e.g. by measuring
diagonally and by using a spirit level.
The side walls and the upper end of the installatio
niche must be at least 16 mm thick.

Neighbouring kitchen furniture

The new appliance is screw ed down tightly using parts
of the cabinet and the upper cabinet.
Care should therefore be take n, that all upper cabinets
to which something has been
connected to the subsurface
means.
The minimum thickness of the base should be
a minimum of 19 mm.
ilt
pense
alist
ht
t
lation
n
fastened are securely
or wall by appropriate
k