Switching The Appliance On For The First Time; Preparing The Furniture Doors; Loading The Appliance Door; Removing Positioning Aids - Siemens CI24R Series Installation Instruction

3. Switching the appliance on for the
first time
The appliance should now be switched on for the fir
time in order to ensure the accuracy of the followi
mounting steps and with it, the appearance of the e
kitchen frontage.
1. Open the appliance door.
2. Actuate the appliance's On/Off button.
Only for appliances with a water connection:
In the case of possible damage of the water mains,
keep the shut-off tap closed in order to avoid the
damage from water coming out.
4. Preparing the
Important note:
When working on the furniture doors, care should be
taken to the following:

Always carry out screwing jo bs on the most stable
part of the furniture door. Never screw into fillin gs
or similar areas.

Always selects screws with a length smaller than
the thickness of the cabinet front.

Protect the surfaces of the furniture doors during
installation against damage.
The overall weight of the furniture door including
handle should not exceed the following values:
Appliance width Overall width of the furniture door
45.1 cm
60.3 cm
75.6 cm
* Wine storage compartment
Instead of one large door, two furniture doors can b
mounted next to each other in the case of appliance
with a width of 76 and 91 cm. These furniture doors
then connected using a metal strip on the rear.
This metal strip is available from your dealer as a
installation accessory (Connection element for furni
doors). For further informat ion see section "Tools and
Accessories which are needed".
Note:
The instructions for carrying out this work step ca n be
found in the separate installa tion instructions for this
accessory.
All manuals and user guides at all-guides.com
ng
ntire
risk of
furniture doors
the
20 kg (8.5 kg *)
25 kg (14.5 kg *)
29 kg
n
5.

Loading the appliance door

When attaching the furniture doors it is recommende
to load the storage sections in the door with weigh
st
order to ensure that the when adjusting crack
dimensions turn out to be as precise as possible.
Loading recommendations:
Appliance width
45.1 cm
60.3 cm
75.6 cm
6.

Removing positioning aids

Unscrew the positioning aids from the appliance doo
Note:
The positioning aids will still be needed in the co
mounting.
e
s
are
ture
Loading of the appliance door
10 kg
15 kg
20 kg
d
ts in
r.
urse of
NV