Fastening The Adjusting Rib To The Furniture Door; Fastening The Fixing Rib To The Furniture Door - Siemens CI24R Series Installation Instruction

7. Fastening the adjusting rib to the
furniture door
1. Measure distance A between the adjusting rail and
the furniture parts above.
2. Loosen the two nuts (a) and remove the adjusting
rib (b).
3. Mark this value A on the rear side of the furniture
door.
4. Determine the middle of the door and label it.
5. Rest the adjusting rib on the furniture door and
align to the markings. Mark the drill holes.
6. Pre-drill the holes.
7. Tightly screw the adjusting rib.
The minimum number of screws required for this
depends on the width of the furniture door.
OM
All manuals and user guides at all-guides.com
Note:


8.
1.
2.
3.
4.
One screw should be screwed in under the
threaded rod in each case.
The adjusting rib has a various holes for different
furniture door design vari ations. Always carry out
screwing jobs on the most stable part of the
furniture door.
Fastening the fixing rib to the
furniture door
Hang the furniture door on the threaded rod (a).
Adjust the furniture door using the threaded rod
(Torx screwdriver)
Re-examine the dimens ions of the crack
continuously. To do this, use the assembly
gauge (b).
Transfer the position of the fastening screws on the
outer edge of the appliance door to the furniture
door and mark.
Remove furniture door.