Drain Hose Installation - Samsung AM Series Installation Manual

Drain hose installation

Care must be taken when installing the drain hose for the indoor unit to ensure that any condensate water is
correctly drained outside.
The drain hose can be installed to the right of the base pan.
1
Installing the drain hose should be the shorter, the better.
f In order to discharge condensation water, the drain hose should keep tilted.
f
f Fix the drain hose with Cable-Tie, so that it will not separate from the machine.
f
2
Insulate and fix the drain hose according to the figure.
f Insert the drain hose to bottom of the outfall of water basin. f
f Lock flexible hose clamp of the drain hose according to the figure. f
f Wind and wrap flexible hose clamp and drain hose fully with thermal insulation sponge; fix both ends of external layer
f
with ribbon for thermal insulation.
f After being installed, drain hose must be insulated fully by heat insulating material. (To be provided at site.) f
Flexible hose clamp
of drain hose
Joint of drain hose
Drain hose
Wrap thermal sleeve hose
wall
After installing the pipes, close the piping
connection hole to prevent in ow of dust.
(Use the insulation included with the unit, or
purchase materials that suit your site.)
12
Fix with Cable-Tie
Drain hose
A-A'
hose
×
No grade
• As shown in the figure,
tighten the flexible hose
clamp of the drain hose.
×
No slack
Insulation
• After tightening the
flexible hose clamp,
attach the Insulation.
×
No in the water
water