Drainpipe And Drain Hose Installation - Samsung Duct Type Series User & Installation Manual

Ma duct
Hide thumbs Also See for Duct Type Series:
Table of Contents

Advertisement

Pipe size
Pipe
mm
Liquid pipe
6.35
9.52
Gas pipe
12.70
15.88
19.05
<Geological condition>
-
<Operation purpose condition>
- Restaurant ceiling, sauna, swimming pool etc.
<Building construction condition>
- The ceiling frequently exposed to moisture and cooling is not covered.
e.g. The pipe installed at a corridor of a dormitory and studio or near an exit that opens and closes frequently.
- The place where the pipe is installed is highly humid due to the lack of ventilation system.

Drainpipe and drain hose installation

Care must be taken when installing the drain hose for the indoor unit to ensure that any conden-
sate water is correctly drained outside.
The drain hose can be installed to the right of the base pan.
1
Installing the drain hose should be the shorter, the better.
◆ In order to discharge condensation water, the drain hose should keep tilted.
◆ Fix the drain hose with Cable-Tie, so that it will not separate from the machine.
2
Insulate and fix the drain hose according to the figure.
◆ Insert the drain hose to bottom of the outfall of water basin.
◆ Lock steel ring of the drain hose according to the figure.
external layer with ribbon for thermal insulation.
Steel ring of drain hose
Joint of drain hose
Drain hose
Insulation Type (Heating/Cooling)
General
[30 °C(86 °F), 85 %]
EPDM, NBR
inch
mm
inch
9
3/8
13
1/2
1/4
13
1/2
3/8
1/2
19
3/4
5/8
3/4
Fix with Cable-Tie
Drain hose
High humidity
[30 °C(86 °F), over 85 %]
Remarks
mm
inch
9
3/8
13
1/2
19
3/4
Heating resisting
temperature over
25
1
As shown in the figure,
tighten steel ring of the
drain hose.
-
29

Advertisement

Table of Contents
loading

Table of Contents