Table of Contents
Advertisement
When installing insulation in places and conditions below, use the same insulation that is used for high humidity
conditions.
<Geological condition>
- High humidity places such as shoreline, hot spring, near lake or river, and ridge (when the part of the building is
covered by earth and sand.)
<Operation purpose condition>
- Restaurant ceiling, sauna, swimming pool etc.
<Building construction condition>
- The ceiling frequently exposed to moisture and cooling is not covered.
e.g. The pipe installed at a corridor of a dormitory and studio or near an exit that opens and closes frequently.
- The place where the pipe is installed is highly humid due to the lack of ventilation system.
Drainpipe and drain hose installation
Care must be taken when installing the drainpipe and drain hose for the
indoor unit so that condensate water is drained correctly outside.
1 Fix the flexible hose to the drainpipe.
The connection port of the flexible hose and PVC drainpipe must be
fixed with PVC adhesives.
Check out that the connected part doesn't leak.
2 Connect the flexible hose to the flexible hose port.
Make sure that a rubber ring is installed on the drain hose port.
3 Install the drainpipe as shortly as possible.
Give a slightly slant to the drainpipe for proper drainage of
condensate water.
There must be no gap on the connected part so that the drainpipe
is not separated from the flexible hose .
4 Insulate the drainpipe, and then fix it as indicated.
CAC 유럽향 1way_IM_34507A-05_EN.indd 11
Flexible hose
Drain hose port
Insulation cover band
Insulation drainpipe
Insulation cover drain
Indoor
Band(Not supplied)
unit
Drain
hose
port
Flexible
Band
Adhesives
hose
Drain hose
Drain pipe
Band
11
2016-08-02 오후 4:08:11
Advertisement
Table of Contents
