Table of Contents
Advertisement
6. Turn the BPBIO320S on by pressing the power switch located on the back of the device.
7. When the BPBIO320S is turned on, the following screen is displayed and a calibration is automatically
performed.
Caution
Do not operate or touch the device while it is calibrating. It may cause errors to future tests.
•
Attention
Pendant l'auto-test (environ 10 secondes), n'utilisez ou ne touchez pas BPBIO320S. Des erreurs peuvent
•
survenir ou les résultats du test peuvent être inexacts après l'auto-test.
8. Adjust the volume by turning the volume knob on the rear of the BPBIO320S.
10
Power Switch
Advertisement
Table of Contents
