Advertisement
3.0 SAFETY NOTES
*Be careful working outside with overhead power lines to avoid electrocution.
Use only originally supplied accessories.
„
Before you make any connections: disconnect your equipment from the 230 V main power to
„
avoid electric shocks during installation.
Short circuit in the coaxial cable MAY permanently damage your Digital Receiver.
„
Never use AC adapters with incorrect specifications. This MAY permanently damage your antenna
„
or Digital Receiver. Always check voltages and polarization of the adapter before connecting it.
4.0 CONNECTING THE ANTENNA
Preparations
1. Check if the broadcast in your country is horizontally or vertically polarised.
2. Fix the antenna to the pole as shown in the picture <Fig. 2>
3. Depending on how the signals are broadcasted (horizontally or vertically) you will have to mount
your antenna in the horizontal or vertical position for best performance.
4. Your antenna needs 5 V power to work properly. Check in the menu or user manual of your
terrestrial receiver to see if it supports the needed 5 V power.
(ref. 450005
not supplied*)
4
1
(ref. 450005)
2
3
4
Fig. 2
Advertisement
