Advertisement
1. Connector: F
2. RF Out
3. Connector: IEC
4. Set-Top Box without 5V output
5.0 INSTALLATION OF THE ANTENNA
1. Turn on your TV set and turn on your Digital Terrestrial Receiver.
2. Press the "MENU" button on the remote control of your Digital Terrestrial Receiver. Select the menu
on your receiver that shows the signal level indicators. (Normally you can find the signal meter in
the Channel Scan field of the menu). Refer to the user manual of your Digital Terrestrial Receiver.
3. Now optimise the signal strength by finding the best position for the antenna. Keeping the
antenna in your hand, try to reach the highest or best possible position. Slowly move the antenna
to different positions around the house, at the same time monitor the signal bars in the menu,
once the signal indicator shows the maximum signal, fix the antenna on that position.
NOTE:
„
„
Once the best position for the antenna has been found it can be mounted and fixed in that place.
You can fix the antenna on the wall, on the balcony or on a metal pole.
It is recommended NOT to place the antenna near to:
Devices that are strong source of radiation or interference such as DECT and
GSM telephones, transmitters, microwaves, wifi, etc.
Devices with high power consumption such as electrical heater, air
conditioner, hairdryers, etc.
9
Advertisement
