Safety Notes; Connecting The Antenna - Strong SRT ANT 12 User Manual

3.0 Safety notes

Use only originally supplied accessories
n
Before you make any connections: disconnect your equipment from the 230 V main power
n
to avoid electrical shocks during installation
Short Circuit in the coaxial cable MAY permanently damage your Digital Receiver
n
Never install the Antenna outside your house or in humid rooms such as bathrooms
n
Never use AC Adaptors with wrong specifications, this MAY permanently damage your
n
antenna or Digital Receiver. Always check voltages and polarisation of the adaptor before
connecting it

4.0 Connecting the antenna

Check if the broadcast in your country is Horizontal or Vertical polarized
n
Click the Antenna in the plastic holder as shown in the pictures
n
Disconnect your Digital Receiver from the 230 V main power
n
Connect the supplied coaxial cable to the antenna: carefully press the inner lead of the cable
n
into the Female-F connector at the back of the antenna. Turn the covering nut clockwise with
your HANDS until it is fixed
Connect the other side of the coaxial cable to your Digital Terrestrial Receiver. Normally the
n
input connector on your receiver is marked as "ANT" (in) or as "RF"(in). Refer to the
User Manual of your Digital Terrestrial Receiver
Connect your Digital Receiver to the 230 V main power
n
4
Main unit Stand Coaxial Cable
PART 1 Engli
sh
l
Adaptor