ASSEMBLY GUIDE
As with any new implement, the shaft that attaches to the tractor may need to be cut to
length. Consult the included Ibex Equipment PTO Shaft Cutting Guide.
The PTO shaft with the one-way clutch installed between the 90 degree gearbox and the
mower's drum unit, as oriented in Figure 28. Install the thicker clutch end so that it is attached
to drum unit.
Figure 28 connect the driveline with one-way clutch
Attach the PTO shaft guard chains as shown in Figure 29 so that the guards do not spin.
Figure 29 guard chains attached
2022-1.0 IBEX EQUIPMENT CO.
17