IBEX TS51C Assembly Manual page 14

ASSEMBLY GUIDE
Figure 20 top spring arm installed with pin blocked up by using a 2x4
Next, get the hardware to secure the spring arm to the lower lift arm as shown in Figure 21.
Figure 21 hardware to attach spring arm to lower arm
Connect the lower arm to the top arm as shown in Figure 22. Be sure the bolt goes through
the loop on the spring inside the top arm. The lower arm will need to be raised up at an angle
to line everything up.
Figure 22 top spring arm attachment to lower arm
2022-1.0 IBEX EQUIPMENT CO. 13